Cables :: Keeping you connected

2 Channel Video Switch


2 Channel Video Switch

•Allows one monitor to be switched between two video sources
•Can be controlled manually, via Serial port , or from TTL level (or contact closure)
•Select input 1, input 2, or blank the output
•Auto mode automatically scans and selects the input with active video
•Infinite switching cycle life
•Can drive long cables
•Terminates both video input signals and buffers the output to protect signal integrity
•Includes pushbutton and serial cables for control
The Model VS-2 is a versatile, compact, high performance, solid-state, 2 input x 1 output, VGA video switch that can operate at resolutions of up to 1600x1200. The unit allows one monitor to be switched between two video sources.
Equipment Included:UL approved 110 Vac adapter (6 Vdc @ 300 ma output on 2.5mm center positive coaxial plug)

(220 Vac adapters with CE approval are also available, please specify at the time of order).

6 ft, Serial Control Cable

6 ft, Pushbutton Switch CableDimensions:W x D x H: 4¼ x 2¾ x 1¼Video Specs:Bandwidth: 250 MHz
Input impedance:Video: 75 ohms on RGB, 330 ohms on H,V
Coupling: DC
Signal Level: Video: 0 to 0.7 v p-p
Sync.: TTL
MTBF:90,000 hrs (Calculated)
VS-2 Manual

Add to Cart:

  • Model: HRT-VS-2
  • Shipping Weight: 0.5lbs
  • 2 Units in Stock
  • Manufactured by: Hall Research

This product was added to our catalog on Thursday 09 September, 2010.

Your IP Address is:
Copyright © 2018 Cables Extra. Powered by Zen Cart