Cables Extra.com :: Keeping you connected


Video over UTP extension system

$258.90

Description
The UV1 is a single channel VGA video extender kit consisting of a sender (UV1-S) and a receiver (UV1-R). The sender converts a PC's VGA signal into a format that can be transmitted using a single inexpensive and commonly available Category-5 Unshielded Twisted Pair (UTP) cable with RJ45 connectors. The Cat5 signal is converted at the receiver back to VGA for connection to your monitor, projector or other display device. The UV1 can extend HD video up to 500 feet (150 meters) with little to no degradation of video quality.

The sender and receiver are each housed in a small plastic enclosure. Included with the pair of devices are: one small power adapter (can be powered at either end), and a short adapter cable for easy connection to the standard HD-15 connector of the PC.
Block Diagram

Specifications
Dimensions:UV1-Sender & UV1-Receiver each
0.8" H x 1.7" W x 4.5" DWeight:2 lbs. (shipping)Power Supply:From utility-power (mains) outlet, through included external power adapter. Output Voltage: 9v DC Center-Positive. Current requirement 500 ma maxMax Distance:Up to 500 ft. (150 m) for VGA and Component Video models, or 2000 ft (609 m) for Composite Video and Audio modelsResolution:Up to 1920x1440 non-interlaced at 60HzStandards:VGA, SVGA, XGA, or UXGA videoVideo Types:VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr
Brochures
UV1 Brochure
Manuals
UV1 Manual

Add to Cart:

  • Model: HRT-UV1
  • Shipping Weight: 0.5lbs
  • 2 Units in Stock
  • Manufactured by: Hall Research


This product was added to our catalog on Tuesday 01 June, 2010.

Your IP Address is: 54.224.43.96
Copyright © 2017 Cables Extra. Powered by Zen Cart
Covid K-12